Posts tagged brick repair
PTC Parking Deck

Project Description: Currently ongoing project where EBS is cutting out and re-caulking 35,000 LF of existing sealant in Dbl-T sandwich slab parking deck with new backer rod and urethane sealants. This project had to be completed in sections to allow for full operation of the parking deck while project was ongoing. A tremendous amount of work went into this project to protect the cars still utilizing the deck and to protect employees from traffic. This project was two floors on two different parking decks - planning and logistics were a force to be managed.

Read More
New London United Methodist Church

Repointing of the historic brick on 3 elevations of the Chapel including front entry, bell tower, and towers. Power washing and applying a clear penetrating sealer to all surfaces repointed to protect from water intrusion.

Special attention had to be paid to the arch over the front doors and the intricate details of the historic brick in all specialized locations including the inset windows flanking the front doors.

Read More
Cedar Grove Lutheran Church

Repointing of historic brick on side, rear, and courtyard of Cedar Grove Lutheran Church in Leesville SC. This project was a completion of the remainder of the original church, we repointed the front and towers a two years prior.

After removing old mortar and replacing with new, the facility was pressure washed and a clear sealer was applied to prevent water intrusion in the future.

Read More
Pettit Tower - Roper Hospital

Remove and replace any bad brick based on engineers direction, brick repointing, thru wall flashing, concrete repair, expansion joint removal and replacement, structural repinning of precast concrete panels, removing and replacing brick control joints, brick to window perimeter sealants and wet glazing windows, saw cut relief joints at the corners of the brick construction to allow for brick movement.

Work proceeded around facility with over 10 Drops taking place until complete.

Read More
Charleston VA Hospital

Started the work on the lower elevation. Rigged the building with Swing Stages. Trimmed the gaskets between the glass and metal framing and caulked with silicone caulk. Removed the perimeter sealant around the Curtain Wall and the windows and replaced with new sealant. Removed and installed the new silspan at the joints in the EIFS. Power Washed all the walls and coated with an elastomeric coating. The same sequence was done at the upper elevation.

Read More
Trademark

Started the work on the lower elevation. Rigged the building with Swing Stages. Trimmed the gaskets between the glass and metal framing and caulked with silicone caulk. Removed the perimeter sealant around the Curtain Wall and the windows and replaced with new sealant. Removed and installed the new silspan at the joints in the EIFS. Power Washed all the walls and coated with an elastomeric coating. The same sequence was done at the upper elevation.

Read More